Insights

Solar, explained by engineers.

Module reliability, structures, safety, metering and commissioning: what we check on every project, written down.

Modules

Reading the Kiwa PVEL Scorecard before you buy solar modules

What Kiwa PVEL's thermal cycling, damp heat, hail, PID and UVID tests reveal, what the 2026 Scorecard found, and how to use it in a module purchase order.

Modules

TOPCon, HJT, back contact or bifacial: choosing modules for Indian roofs

How n-type cell technologies compare on temperature coefficient, degradation and bifacial gain, where TOPCon needs care, and what ALMM List-II changes in 2026.

Engineering

Mounting solar on metal sheds: mini-rails, purlin fixing and standing seam clamps

How to choose a mounting system for trapezoidal and standing seam roofs, design for wind uplift to IS 875 (Part 3), and prevent leaks, corrosion and module cracks.

Engineering

Solar on RCC roofs: anchors, ballast, pedestals or an elevated structure?

Choosing a mounting method for flat concrete roofs, checking slab capacity, protecting waterproofing, spacing rows, and when an elevated structure is worth it.

Safety

Working at height on solar roofs: skylights, walkways and lifelines

Why falls through fragile roofs are the biggest hazard in rooftop solar, the controls needed during construction, and the permanent safety features a plant should be handed over with.

Safety

DC fire safety in rooftop solar: connectors, isolators and cable routing

Where solar fires actually start, why DC arcs are different, and the connector, cabling, protection and inspection practices that design them out.

Engineering

Earthing, lightning and surge protection for solar plants

How protective earthing, lightning protection to IEC 62305 and surge protection devices to IEC 61643-31 work together on a rooftop plant, and the mistakes to avoid.

Grid & Metering

Net metering, net billing or zero export? Metering and DG sync for C&I solar

How net metering, net billing, gross metering and zero-export systems work for Indian businesses, how time-of-day tariffs change the maths, and how to run solar safely with diesel generators.

Engineering

Inverter sizing for commercial solar: DC/AC ratio, clipping and string design

What the DC/AC ratio means, how much clipping is acceptable, and the cold-morning and hot-afternoon voltage checks every string design must pass.

O&M

Commissioning a solar plant properly: IEC 62446 tests, I-V curves, thermography and EL

The tests that prove a solar plant was built correctly, what each one catches, how performance ratio is verified, and the handover file you should insist on.

Solar Finance

CAPEX, RESCO, PPA or financed: choosing the right solar model

How CAPEX, RESCO/PPA, financed and open access solar models compare for Indian businesses, with a worked example for a ₹1.5 lakh monthly bill.

Ready to turn your electricity bill into a strategy?

Share your name, monthly electricity bill and location. We’ll map the right solar structure.